Peristaltic Samplers

A peristaltic sampler uses a peristaltic pump to create the vacuum and pressure to move fluid. These units are good for portable applications and have an easily replaceable fluid path. The tube used in these units isn't purposely over or under sized so tubing is less expensive. A non-contacting ultrasonic fluid sensor or the economical smart continuity keep you sample volumes accurate. For a detailed comparison click here.

  • AC powered
  • Industrial Refrigerator Cooled
  • Pump Design for long Tube life (24 million pump counts)
  • Clear Cover for Visibility and Safety
  • Safety Switch in Pump
  • Ultrasonic or Smart Continuity Sensor
  • Single or Multi-Bottle
  • EPA Approved Transport Velocity
The same high performance peristaltic pump is used on this unit designed to maximize tube life so you get more from each tube than most samplers on the market. The YB is powered by 115AC 60Hz or 220AC 50Hz with an industrial refrigerator (all exposed copper epoxy coated) to maintain sample temperature at 0-4° C. A clear cover allows visibility of the tube condition without cover removal and a safety feature ensures the pump won't operate when the cover is removed. This rugged portable unit is easy to clean and use.

See the configurator or call the factory for all available options.

  • Pump Design for long Tube life (24 million pump counts)
  • Clear Cover for Visibility
  • Safety Pump
  • Ultrasonic or Smart Continuity Sensor
  • Single or Multi-Bottle
  • EPA Recommended Transport Velocity
The peristaltic pump is the heart of this unit, designed to maximize tube life you get more from each tube than most samplers on the market and that gets you more for you money. The PST is powered by battery or by 115AC-220AC 50/60 Hz power supply. Samples are cooled by ice in the insulated bottle case. A clear cover allows visibility of the tube condition without cover removal and a safety feature ensures the pump won't operate when the cover is removed. This rugged portable unit is easy to clean and use.

See the configurator or call the factory for all available options.

  • Small Self Contained Unit
  • Clear Pump for Visibility
  • 1/4 Inch ID Tube
  • Single Bottle Only
  • Light Weight
  • Ultrasonic or Smart Continuity Sensor
This unit is designed for portability. It's rugged and easy to carry to remote locations or if you just need a backup sampler that doesn't empty your pocket. The entire sampler including bottle and battery is contained in a suitcase-sized case while still having the full programming features of larger more expensive models. The 2.5 gallon bottle allows for plenty of sample volume.

See the configurator or call the factory for all available options.

  • Battery Powered
  • Very Compact Portable Unit
  • Clear Pump for Visibility and Safety
  • 1/4 Inch ID Tube
  • Light Weight
  • Pump Forward or Backward
The MSP250 is a manually controlled sampling pump. It operates in forward and reverse to allow a purge and draw. A battery and charger are included. Manual samples are easier with this unit, just leave a hose at the location so you only have to attach it and pump the sample.