Configuration Number: YB8
?
?
?
?
?
?
?
?
?
?
Base Unit
  
Power Requirement
--Pick an Option--
A) 110 VAC
B) 220 VAC
C) Battery Backup, 110 VAC
D) Battery Backup, 220 VAC
Refrigerator
--Pick an Option--
1) None
2) 6.1 CF White w/digital controls 110VAC 60Hz
8) 4.1 cubic foot, White, 110 VAC
Input/Output Option
--Pick an Option--
A) Contact Closure Input
B) Contact Closure and Analog (4-20-mA) Input
C) Contact Closure and Serial Out (RS-232)
D) Contact Closure, Analog (4-20mA) Input and Serial Out (RS-232)
E) 12 VDC Pulsed Input
F) 12 VDC Pulsed Input plus 4-20-mA Input
G) 12 VDC Pulsed Input plus RS-232 Output
H) 12 VDC pulsed input, 4-20mA input, and RS-232 output
Liquid Sensor
--Pick an Option--
2) Ultrasonic Sensor
Bottle Configuration
--Pick an Option--
A) Single Bottle (for composite sampling)
C) Multi-Bottle (for discrete sampling)
D) Multi-Bottle for Discrete Sampling (2 or 4 Bottle Distribution)
Bottle Type
--Pick an Option--
1) None
10) 4 each 2.5-gallon Polyethylene Carboys
11) 2 each 2.5-gallon Polyethylene Carboys
2) 2.5-gallon Polyethylene Bottle
3) 5-gallon Polyethylene Bottle
4) 4-gallon Polyethylene Bottle
5) 2.5-gallon Glass Bottle w/TeflonŽ Cap
6) 1000-ml Polyethylene Bottles (set of 24)
7) 500-ml Polyethylene Bottles (set of 24)
9) 5-gal Polyethylene Container with Snap-On Lids
Hose Type
--Pick an Option--
A) No Hose - Connector Only
B) PVC 3/8-inch ID Hose -- 10 ft.
C) PVC 3/8-inch ID Hose -- 25 ft.
D) PVC 3/8-inch ID Hose -- 50 ft.
E) PVC 3/8-inch ID Hose -- 100 ft.
K) Solid TeflonŽ (or equal) 3/8-inch ID Hose -- 10 ft.
L) Solid TeflonŽ (or equal) 3/8-inch ID Hose -- 25 ft.
M) Solid TeflonŽ (or equal) 3/8-inch ID Hose -- 50 ft.
N) Solid TeflonŽ (or equal) 3/8-inch ID Hose -- 100 ft.
Strainer Type
--Pick an Option--
1) None
2) PVC Strainer (3/8-inch)
3) Stainless Steel Strainer (3/8-inch)
Environmental Protection
--Pick an Option--
A) None
C) Hood, No Heater (Not available on 4.1 CF Refrigerator)
K) 73i Fiberglass Sampler Enclosure with Fan 110VAC 60Hz
L) 73i Fiberglass Sampler Enclosure with Heater, Light, & Fan 110VAC 60Hz
N) 73i Fiberglass Sampler Enclosure with Heater & Fan 110VAC 60Hz
P) 73i Fiberglass Sampler Enclosure with Light & Fan 110VAC 60Hz
Q) 73i Fiberglass Sampler Enclosure with Fan 220 V 50 Hz
R) 73i Fiberglass Sampler Enclosure with Heater, Fan & Light 220 V 50 Hz
S) 73i Fiberglass Sampler Enclosure with Heater & Fan 220 V 50 Hz
T) 73i Fiberglass Sampler Enclosure with Light & Fan 220 V 50 Hz
U) 53i Fiberglass Sampler Enclosure with fan and heater 110VAC 60Hz
V) 53i Fiberglass Sampler Enclosure with fan 110VAC 60Hz
Alarms
--Pick an Option--
1) None
2) Three Alarm Contacts (sample in progress, missed sample, and either bottle-full condition for a single bottle sampler or end-of-sample sequence for multiple bottle sampler)
Configuration Options
Submit
Quick Config
Enter your configuration code below.
Submit
Alert Key
Red conflicts with another selected option value.
Yellow is non-standard, but still a valid configuration.
Username/Password
Enter your credentials below (optional):
Username:
Password: